Mr. T / Kanagawa Japan FERRARI F430 2007model

※The movie shows that after 24 hours application.

I bought Nano Pika Pika Rain Tyep-K for the first time.
I used it after 2 weeks Pika Pika Pika Rain PREMIUM Ceramic Coating application.

First washed my car with Pika Pika Rain Car Shampoo and Microfiber Cloth.
Then I wiped with Pika Pika Rain Microfiber Chamois.

The instruction says that applying to the wet car body is fine,
but in my case, I applied it after wiped the water completely.

I sprayed Nano Pika Pika Rain Type-K 3 times on the wet microfiber cloth.
I also heard that using the solution too much is not so good, so I applied it to one fourth of the hood, and wiped the area with a dry microfiber cloth completely.
Then I repeated it for every small areas.

I was more relax than when I applied Pika Pika Rain PREMIUM Ceramic Coating
because Nano Pika Pika Rain can be recovered if I made a mistake.

Someone who doesn’t have any experience of DIY coating or doesn’t have confidence,
only applying Nano Pika Pika Rain Type-K would be OK.

After application, the red car body got much deeper.
There was nothing to say about the gloss.

As you can watch the video, the water is swelling due to surface tension.
It respells well on the wheels, too.
However, I was impressed by under the hood.
I thought that the material returns to the live, so it is so glossy and the water is sliding as their catch phrase, “This is the water-sliding effect”.

I’m going to use it to keep the glass layer of Pika Pika Rain PREMIUM Ceramic Coating!

Mr. W.K / Ibaraki, Japan / DAIHATSU MOVE 2007model

I applied Pika Pika Rain PREMIUM.

The beginning of the video is after the application.
Before I applied ZERO WATER once a few months.

The latter half of the movie is after 2 weeks from the application.

I think that it is easy to apply as other reviews says.
I’m also satisfied with the water repellency.
I was worried about raining during the application, but I finished it in the cloudy weather.

I’ m going to use Pika Pika Rain again.

Mr. Y.H / Wakayama, Japan / BMW 3series 320i 2007model

【The preparation for applying Pika Pika Rain PREMIUM】

1- Remove the dirt on the car body with a high pressure car wash.
2- Wash a car with car shampoo.
3- Rinse the car shampoo and remove iron filings with clay completely.
4- Remove the iron filings if they adhere on the car body and dry the car body with microfiber cloth completely.
5- Put a few drops of Pika Pika Rain PREMIUM on a sponge and apply thinly and wipe it with another microfiber cloth.

Finally, repeat No.5 step and use the new sponge if you drop it.

Cautions which we must follow are drying the water complete and wiping the liquid of the glass coating after you apply it thinly.
If you don’t do these, you cannot apply evenly.

Also you should better to avoid to apply in the day it might rain if you don’t have a garage.
(I applied it in the fine day.)

【Comparing with before and after the application】

As you can see the video, before the application,
there were hardly any more the water repellency when I splashed, just spread slowly.

However, I was surprised after I applied.

When I splashed the water, it was far from repelling, the water was sliding!

It seemed like I splashed the water to the leaves.

Also it is difficult to find in the video, there were so many scratches on the car body.

However, after applying, there became less noticeable,
so I got the ultimate gloss like sharp black even though my car is not brand new.

(I never thought that scratches become like this, so I was very surprised.)

10 days later, the dirt adhered to the car body, so I tried to splash the water.
Then it was removed by only this.

I am satisfied with the shiny car every time I drove.

I think that the gloss, the anti-dirt power, the durability, the workability and the water sliding…
everything are excellent.

I can recommend this glass coating, Pika Pika Rain PREMIUM strongly.

Mr. A.I / Chiba, Japan / VOLKSWAGEN GLOF 2007model

【Before the application】

【After the first application】


【After the second application】


I tried some other company’s products before.
However, as you can find the pictures, there are water spots on the car body
even though I polish them due to the black color and the dullness was remaining.

About the first application of Pika Pika Rain PREMIUM, I took long time for the preparation.
Then it was needed to revise the application because I cannot wipe it completely.

Accordingly, I challenge to reapply it and I also revised some parts, too.
The gloss became much better than the first time and the reflection was perfect.

For the first time, I can find the tiles which reelected on the car body,
but for the second time, I can distinguish each tiles which reflected like the number of pixels went up.

It is difficult to distinguish at a distance because it was shiny in spite of the first application,
but I was really surprised when I enlarged and checked it.

I also applied it to the tail lenses and the head lights.
Pika Pika Rain Premium spread well as the instruction said.
I want to apply it two more times rather than the second time if I it’s possible.
I was so sorry that I used all of the glass coating.

The movie shows that about 3 weeks later when I reapplied it.
The super gloss lures small bugs, they think that it is a the surface of the water wrongly.

What a shiny gloss even though in the evening.
It is not so different between the scene which reflect on the windshield and it which reflect on the car body.

Mr. K.S / Fukuoka, Japan / TOYOTA CROWN 2007model

I was satisfied with Pika Pika Rain Products, so I bought it again.

As you can see the movie, Pika Pika Rain PREMIUM which was a new product spread well
so I could applied two cars(a sedan and a SUV) twice with one bottle.

The movie shows its water repellency before and after the application.

I was praised that my car doesn’t look like ten years old.
Pika Pika Rain PREMIUM made much easier to wash a car due to nice water-sliding effect.

It is very thankful because the season of pollen and yellow sand.