Glass coating pika pika rain that is the most popular in Japan

Is it possible to apply Pika Pika Rain PREMIUM on other Pika Pika Rain series?

Today we would like talk about the inquiry for Pika Pika Rain PREMIUM Ceramic Coating,

“Is it possible to apply Pika Pika Rain PREMIUM Ceramic Coating on other Pika Pika Rain Coating series?”

The answer is YES!

Same as other our coating, Pika Pika Rain PREMIUM Ceramic Coating can apply on other Pika Pika Rain Coating sereies.
(However, please make note that it is OK after full cure.)

At this time, please wash your car with car shampoo and dry completely.
(Please deal with appropriate preparation before applying.)

Please feel the “premium” water-sliding!

How long does the ceramic coating need for fully cured?

We have above inquiry from our customers many times.

Our Pika Pika Rain Ceramic Coating needs 2 weeks for hardening completely.
Therefore, please don’t wash your car with car shampoo or wash by force during this period.

“Am I not able to wash my car after 2 weeks definitely?”
Then some of you might think like this.

The surface of glass layer can cure with 12 hours, so washing with a microfiber is OK.
However, please do not use car shampoo at this time.
We think that leaving your car is more serious, so please wash it gently when it get dirty.

We would like to recommend avoiding a car wash machine which has hard brushes even though after the glass layer cured fully.
Then please wash your car by hand as much as you can.

Protect your car from scratches! Solutions and precautions!

How do I protect my precious car from scratches?

The one of big problems standing in the way of keeping cars beautiful is…

Ssratches.

“My car got scratches while I’m driving car!”
Some of you happens by your mistake like above.
For these scratches, you can prevent some of them by your cautions.

However, actually almost all of scratches on the car body which is impossible to prevent completely.
For example, scratches which are got in driving, taking off, due to weather and animals… it is impossible to control all of them even though you are be careful.

However, you don’t drive your car not to get scratches, do you?

Then, how do we deal with them?
This time we would like to introduce about the reasons, solutions and precautions for each.

Don’t underestimate scratches! If you leave them…

We said just “scratches” when we explained, but there are many types.
In this section, we would like to explain about its differences and each fears.

■Clawing

These are lines like cat’s nail marks.
There are possibility to get these when some hard materials like a coin or key hit the car body.
Around a doorknob are many small scratches because drivers take out and put in the key.
If the scratches are not so serious, you can deal with them by some easy ways such polishing and applying car coating (to hide them).

■Scrapping

These are for wide area.
Have you ever seen a white car which has black grazes slightly on the corner?
The car gets these when the car scraped the wall or obstacles (electric light poles, crash barriers, vegetation …etc.) or crash two cars.
These can be recovered by polishing, too.

■Sands / stepping-stones

It cannot help making scratches when you drive by sands and stepping-stones.
Regard as sands, these could be scratches during car wash.
Regard as steeping-stones, these could damage the car paint surface when these hit to the car body.
For the parts which get whitish by stepping-stones, please recover with a touch pen yourself or ask professionals for serious ones.

■Dents

The battered car body by the huge impact.
Sometimes these can be recovered when you pat from the other side, but if the dents are serious, there is possibility to exchange all parts.
However, sometimes the paint surface comes off even the dents are not serious and in this case, repainting is also necessary.

■Damages

These are more serious and wider than dents.
Of course it looks bad and you should better to deal with it as soon as possible for safety and maintenance.

■Rust

If you leave the water on scratches or iron fillings, it becomes rust.
Not only brown rust adhere to the car paint surfaces, but also it is eaten by rust if you leave for a long time.
Before rusting, it is possible to recover with chemical products such as an iron fillings remover or a rust remover.
(However, please make sure that it depends on the situation, so you might need puttying or repainting.)

A polishing machine can solve many types of scratches!

If you try to remove scratches which cannot be removed by washing by force, the car body will damage.

Of course there are removers in the market, but it is troublesome if you use different products for different types of dirt.

Someone who wants to make whole of the car body beautiful quickly, we would like to recommend polishing which is using compound and a polishing machine.

Some car waxes in the market content compound, so these can be one way to remove slight scratches, but it depends on the color, so if you own different colors cars, it should be costly.

Moreover, almost all of car wax is only for polishing by hands, if the dirt is expanding, the work must be so hard and applying only car wax is not so durable.

Therefore, you need to reapply the car wax regularly, so polishing the car body with compound is faster for removing scratches.

Then when you polish the car body with compound, we would like to recommend using a polishing machine than polishing by hands.

If the scratches are partial and removable by polishing with compound a little, polishing by hands would be fine, but if you polish the same parts for a long time by force, there is a high risk such polished too much or color irregularity due to friction.

If you use a polishing machine, you can polish evenly and can finish the work much faster than polishing by hands.

However, you have to be careful when you use a polisher, too.
First if you don’t have enough experiences of using a polishing machine, you should better to use a “double-action” type.

In fact, a polishing machine which is used by professionals is a “single-action” type which has stronger power.
But it is difficult to handle, so there is possibility to polish the car body too much. Therefore, we wouldn’t like to recommend it for beginners.

A “double-action” type can move up and down, left and right. It is difficult to get scratches and the friction heat can be cut down.

You can get a polishing machine at a home centers, so please consider about it when you apply compound.

Let’s reduce the damage to the car body by ceramic coating!

Let’s protect your precious car from damages by applying ceramic coating.

There are many good points of ceramic coating.
It can last the beautiful condition at once you apply you don’t have to apply it many times like car wax.
Moreover, the water repellency will get better, so it will be difficult to adhere water spots after raining. Also washing dirt off and drying will get easier, too.

In this section, we would like to explain how to apply Pika Pika Rain Ceramic Coating.

1. Washing

The first step is basic car washing.
Please splash the water to the car and wash adhered dirt and dust off.
Then please wash it with car shampoo.
At this time, please wash with a soft microfiber cloth not to damage to the car body.

2. Preparation

Next, let’s check the car condition!
If you start applying even though scratches and dirt remain on the car body, they will be coated all together, so please do preparation and clean your car.
If there are any scratches and water spots, you can skip this step.

As we said above, compound is an ideal tool for scratches.
Please polish scratches and water spots and make the car body beautiful.

3. Removing oil

Pleaser remove the oil on the car body with Pika Pika Rain Oil Remover.
It is not necessary, but we would like to recommend to do this, because Pika Pika Rain Oil Remover makes fixing much better even though a brand new car.

4. Applying ceramic coating

Finally, you can start to apply ceramic coating after above steps.
Please put a few drops of Pika Pika Rain Ceramic Coating liquid (only for the beginning, about 6 drops) on a sponge and spread it thinly.
After you applied, wiped the liquid with a microfiber cloth.
If you don’t wipe well can be reason of foggy finishing, so please check the results well during wiping.

Also please repeat this step in every small parts.
If apply it widely at one time, the liquid dry before wiping and it is easy to be fogy finishing, so you have to be careful.

Above is how to apply Pika Pika Rain Ceramic Coating.

However, there is one thing which you should be careful.
Please make sure that you don’t have to wash your car anymore even though you applied ceramic coating.
If you leave your car without car washing, dirt on the glass layer cannot be removed. Also if you leave it after raining, the water which remain on the car body could be water spots…

Therefore please don’t forget that car washing is necessary even though you applied ceramic coating.

Moreover, please don’t misunderstand that your car won’t get scratches anymore.
It cannot help getting scratches to the ceramic coating if you drive your car in your daily life. (Of course, the car body can be protected by the ceramic coating.)

The performance will get lower than when you applied it when your car got scratches.
Please apply the ceramic coating with your understanding about it!

Got scratches on the ceramic coating! What should we do?
Ceramic coating has a hard layer, but it cannot help getting scratches.
First, trying not to get them is important, but we would like to introduce solutions when your car gets them!

Be careful at the following situations

■Cautions for car washing

Please wash rough dirt with a plenty of water.
If you wash a car with a microfiber cloth or a sponge which has rough dirt on the car body, the rough dirt is drug and it causes scratches.

Also please use a soft cloth as much as possible. A microfiber cloth is the best.

Finally, please wash your car by hands as much as you can.
If you wash it with a mop or a car wash machine it got slight scratches due to stepping-stones.
If you have to use a car wash machine at any cost, a high pressure car wash machine is fine.

■Cautions for applying ceramic coating

Please don’t apply the ceramic coating by force.
Ceramic coating is different from car wax, so it is better to imagine that making another layer on the car body.
Applying it by force causes scratches.
You don’t have to apply Pika Pika Rain Ceramic Coating by force in the all steps.

If the ceramic coating get scratches…

■For slight scratches

For slight scratches, reapplication of ceramic coating is recommended.
Ceramic coating doesn’t have an effect of removing scratches, but the liquid is filled up in unevenness parts, so it can make the scratches less noticeable.

■For deep scratches

For scratches which reach to the clear layer, it is difficult to hide by ceramic coating.
In this case, removing scratches is the only way.
However, if you polish with compound, the ceramic coating is polished together.
You should better to reapply it to the parts which you polished.
By the way, if scratches are very deep such reach to the car paint surface cannot be removed by polishing with compound.

Let’s prevent scratches by daily maintenance!

How was this blog?

We explained a lot, but we must ask you to make sure “there is no way to prevent scratches completely”.
However, please remember that the damage from scratches can be reduced by some good tips, too.

We totally understand you want not to damage your precious car and want to do everything for it as much you can.

We would like to advice for you as below;

Checking your precious car condition every car wash,
(Of course Pika Pika Rain Ceramic Coating has many any good effects!)
and when it gets scratches, please recover them.

Please don’t be too much nervous, just think “A car gets scratches in the end”.
Then please find own style for car maintenance and let’s deal with scratches

【FAQ】How should I deal with parts which cannot be applied unevenly?

This time we would like to talk about inquiries which we often get from our customers!

How should I do if the ceramic coating get foggy finishing?

It means that unwiped ceramic coating.
For example, it happens lack of confirmation when you apply it the night or you don’t wipe it with microfiber cloth well.

The things which you should to do is

wiping the liquid with microfiber cloth.

If the ceramic coating hasn’t got hard yet, it can be spread by wiping and foggy parts will disappear.
When you find the foggy parts after application, let’s spread it with microfiber cloth immediately!

“I cannot deal with it even though I wiped…”

It is sorry for someone like above.It has already started to cure the glass layer.
For you, there is only way which is
polishing with compound.

Let’s polish the foggy parts with a sponge which was put compound.
Then, the glass layer will be removed and the foggy parts will also disappear.

However, the glass layer is removed, too by polishing.
Therefore please apply Pika Pika Rain Ceramic Coating to the same parts again.

After applying, we know you’re happy, but please don’t leave it.
Checking whether you forget to wipe the liquid by many angles is one of tips of ceramic coating.

For the stunning gloss! How to reapply Pika Pika Rain PREMIUM Ceramic Coating

Is there anyone remain the liquid of Pika Pika Rain PREMIUM Ceramic Coating after the application?
In this case, let’s reapply it!
The glass layer will become thicker and the gloss will become deeper, too!

However!

The second application is for the experienced because you have to store, check the liquid and to set the schedule.
Moreover, it is self-responsibility even though you make a mistake.

This time we would like to introduce cautions and points for the second application not to make a mistake,

How to store remain Pika Pika Rain PREMIUM Ceramic Coating

Storing in a cool and dark place!

After you finished the first application, please store the bottle in a cool and dark place surely.
At this time, please close a cup tightly on the bottle not the liquid to contact with the air.
If you don’t close a cup tightly or store in a humid place, the air makes a crystalization fast.

If you find some crystals on the cap or the liquid in the bottle becomes couldly…
After 2 weeks, if you find that something powdery white (it is crystal) or the liquid becomes cloudy when you open the cap, it means that Pika Pika Rain PREMIUM Ceramic Coating has already started to crystalize, so please don’t apply it anymore.

There is possibility to damage the car body by the crystals of glass.

Rarely, the liquid is usable but some crystals are on neck of the bottle.
In this case, please wipe the crystals on the bottle with a microfiber cloth before you use.

A cool and dark place can store it up to 1 month

Pika Pika Rain PREMIUM Ceramic Coating which has already opened can be stored up to 1 month even though you stored it in a cool, dark place. Because at once you opened, it has started to crystalize

Also if you leave the bottle open for a long time or the water drops in the bottle, crystallization should happen quickly.

Therefore, please do the second application within a month if you can.
You should better to management the schedule when you do the first application

How to reapply Pika Pika Rain PREMIUM Ceramic Coating

Please wait 2 weeks at lease for curing the liquid completely!

Pika Pika Rain needs 2 weeks to cure completely.
Therefore, please wait 2 weeks at lease if you want to reapply it.
If you reapply it before full cured, there is possibility to remove the first layer of Pika Pika Rain PREMIUM Ceramic Coating together when you apply with a sponge or wipe with a microfiber cloth.

Wash with a car shampoo before the second application

Same as the first time, please wash your car with a car shampoo to remove the dirt.

Washing with only water is fine if you keep it in a garage and your car looks beautiful.
However, we recommend washing with a car shampoo as much as you can if you use your car in this period.

The way of application is same as the first time!

The second application is same as the first one.
Please apply with a sponge which is put on the liquid and wipe it with a microfiber cloth.

At this time, please check where you applied not to apply it unevenly.

We heard that some customers could not apply it unevenly because they was too much relax due to the second time..

Do not get wet for 12 hours after the second application!

It is also same as the first time, please do not allow your car get wet for 12 hours after the second application.
You have to reapply it in a limited period and care about the water, so that’s why it is for experienced.

Of course, you can apply it even though it is raining if you have a garage.

How was it?

“The first application is even hard… so I cannot think about the second application…”

Some of you might think like above, but the second application will make the gloss deeper and you will like your precious car better!

It is waste to leave the remain liquid, so please try to reapply it!

If you don’t have enough amount for the second application, we recommend to reapply it to only the roof and bonnet which is easy to damage.